07 February 2018
- Latest News / Press
Dynaudio Updates Xeo Wireless Speaker Range
Dynaudio updates award-winning Xeo range.

Two new speakers bring new tunings, new looks, new inputs... and a new level of wireless hi-fi performance.
 

Skanderborg, Denmark – February 6, 2018

Danish loudspeaker legend Dynaudio has rebooted its Xeo active wireless hi-fi speaker family. The new Xeo 20 and Xeo 30 speakers replace the Xeo 4 and 6, and join the multi-award-winning Xeo 2 in the company’s range.

As well as getting a new look, the Xeo 20 and Xeo 30 now have updated tunings for even better performance, plus direct inputs for analogue and digital sources, upgraded DSP (digital signal processing) capabilities, full 24-bit/96kHz hi-res support and built-in high-quality aptX Bluetooth.

New tuning and DSP

The range’s new firmware comes with new tunings, derived from Dynaudio’s celebrated LYD 5 professional studio monitors. The upgrade includes improved compressor and limiter algorithms and an updated crossover design with a larger overlap between drivers to give improved bass and improved off-axis performance. The DSP engine has also been given more processing power (as well as being optimised) to enhance its speaker-position compensation for corner, wall and free- space placements.

“We’ve tried to apply the KISS (Keep It Simple, Stupid!) policy and retain a more ‘analogue’ style of filter design when it comes to the crossover. We’ve also made sure to minimise the amount of EQ the system uses to get a good performance. It’s a similar approach to the one we used when tuning the new Focus XD range,” says Dynaudio Senior Designer, Acoustics, Stephen Entwistle.

Direct inputs, hi-res audio and built-in Bluetooth

The whole Xeo range now gets direct Toslink (digital optical), analogue RCA and analogue stereo minijack inputs on each master speaker. The signal is transmitted to the slave speaker in high-resolution 24-bit/96kHz form.

All Xeo speakers now support full 24-bit/96kHz hi-res audio via the optical digital input, and also wirelessly from the optional Dynaudio Connect transmitter box.

There’s also Bluetooth on board for high-quality aptX wireless streaming without the need for an external Connect box (although using one gives users even more input options).

Design touches

The new speakers have been given a more modern design, including subtly rounding the cabinets’ corners, moving the IR/LED module from the top to below the woofers, finishing the metal driver parts in black and changing the included grilles to black. Both models are available in Black Satin and White Satin finishes.

“We made the Xeo 20 and Xeo 30 simpler and more elegant without needing a ground-up re-design. The colour scheme is simplified too, as on the new Focus XD. We’re really proud of how it turned out,” says Dynaudio Design Director Malte Köhn.

New remote control

The Xeo 20 and Xeo 30 both have a new IR remote control that works both with their direct inputs and the optional Dynaudio Connect box. The remote’s transmitting range has been improved, too.

MSP woofers

MSP (Magnesium Silicate Polymer) is a material developed in-house at Dynaudio to deliver exactly the right balance of lightness, stiffness and damping – which listeners hear as exactly the right balance of power, finesse and control. It doesn’t age like other materials either, meaning far less degradation of performance over long periods... which is why the company has used it in its speakers since 1977.

Xeo 20 (€2199 / £1999 per pair)

The compact stand-mounted Xeo 20 replaces the Xeo 4. It’s slightly larger than the Xeo 4 and now uses a slot-type bass port for improved low-frequency performance. Its 28mm Esotec soft-dome tweeter and 14cm Esotec MSP woofer are each powered by their own individually tuned 65W digital amplifier (up from twin 50W amps in the Xeo 4) – all marshalled by an upgraded crossover and DSP.
The Xeo 20 is designed for use with Dynaudio’s optional Stand 10 and Stand 20 speaker stands. There’s also built-in provision for Vesa 100 mounts.

Xeo 30 (€3599 / £3199 per pair):

The floor-standing Xeo 30 replaces the Xeo 6. It’s a compact model that uses a 28mm Esotec soft-dome tweeter and twin 14cm Esotec MSP woofers in a 2.5-way crossover design.

Each driver is powered by its own individually tuned 65W digital amplifier (boosted from the Xeo 6’s 50W versions). And, like its smaller companion, the Xeo 30 has an upgraded crossover to enhance integration and off-axis performance.

As with the Xeo 20, the Xeo 30 is slightly bigger than its predecessor for improved bass performance – and it gets the same uprated DSP, updated tuning and upscale design touches (including the repositioned IR/LED module) as its stand-mounted sibling.

Key specs Xeo 20

Digital inputs: Toslink optical

Analogue inputs: RCA stereo, 3.5mm minijack

Wireless: 24-bit/96kHz
Frequency response: 40Hz – 21kHz
Crossover: 4260Hz

Drivers: 1x 14cm MSP woofer, 1x 28mm soft-dome tweeter Power: 2x 65W

Dimensions (W x H x D): 180 x 320 x 257mm
Weight: 6.2kg

Finishes: Black Satin, White Satin

Xeo 30

Digital inputs:
Toslink optical

Analogue inputs: RCA stereo, 3.5mm minijack

Wireless: 24-bit/96kHz
Frequency response: 36Hz – 21kHz
Crossover: 200/4700Hz

Drivers: 2x 14cm MSP woofers, 1x 28mm soft-dome tweeter Power: 3x 65W

Dimensions (W x H x D): 228 x 852 x 275mm

Weight: 13.4kg

Finishes: Black Satin, White Satin

Dynaudio website


Absounds Generic Advert
HD Tracks John Petrucci
Wilson Audio Alexia series2 Youtube video
Twitter
You Tube Channel
Facebook Link